YCM
YCM YCM C10/C10DM
Description
The C Series vertical machining centers deliver high-caliber performance providing superb cutting ability with reduced vibration. The C Series is built with an extra large delta-shaped casting at the base of the machine’s column to ensure the highest level of stability during high-speed movement. Every machine tool is built and handcrafted for rigidity, thermal stability, and repeatability. The C Series produces consistent high-quality results from the first part to the last.
YCM In-house IDD Spindle
- Tool unclamping cushion extends spindle bearing life by protecting spindle bearing from tool unclamping force.
- Spindle cooling system (opt.) removes heat efficiently and minimizes thermal deformation.
- Ceramic bearings features low inertia mass, low centrifugal force, high rigidity and low coefficient of thermal deformation.
- High precision helical springs features high dynamic balance and low vibration.
- Grease lubrication for 12,000 rpm spindle ; Oil-air lubrication for 15,000 rpm spindle (opt.).
High Rigidity Design
- FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
- Direct drive provides backlash free, best accuracy, reliability and stability.
- All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed
- The rigid body construction makes for uncompromising precision and rigidity.
High Stability Tool Magazine
- Absolute encoder ATC system provides high stability and speed.
- Inverter controlled, prevents tool change speed from changing under different power supply frequency.
- Tool change speed can be adjustable for heavy tools.
- Auto Tool Change (T-T): 1.8 sec.
- Tool Magazine Capacity: 24T
Automatic Tool Magazine Door Design
- Driven by pneumatic cylinder.
- Prevent coolant and chips from entering tool magazine.
Brand New Exterior Design
- Full enclosure exterior (including top cover).
- Convertible side window for convenient chip removal.
- Aesthetic rear cover design.
- Coolant shower for efficient chip removal <NXV Series std.>
- Travels 40″ x 23.6″ x 23.6″
- Table Size 40.09″ x 25.59″
- Max. Table Load 2,205 lbs
- Roller Guideways in all Axes
- (C10DM) Linear Scales on all axes
- 1G Acceleration in all Axes
- X/Y/Z Rapid Feedrate 1,890 ipm (C10DM) 945 ipm
- Max Cutting Feedrate 787 ipm
- Smart rigid tapping
- Fanuc MXP200FB+ Control
- AICC II+, high precision, and high accuracy AI contour control
- Smooth tolerance control+
- 400 blocks of look-ahead
- CTS Prep w/ Rotary Union
- 30 Tool ATC (Opt 48/60)
- Machine Weight 15,432 LBS
Error: Contact form not found.
YCM In-house IDD Spindle
- Tool unclamping cushion extends spindle bearing life by protecting spindle bearing from tool unclamping force.
- Spindle cooling system (opt.) removes heat efficiently and minimizes thermal deformation.
- Ceramic bearings features low inertia mass, low centrifugal force, high rigidity and low coefficient of thermal deformation.
- High precision helical springs features high dynamic balance and low vibration.
- Grease lubrication for 12,000 rpm spindle ; Oil-air lubrication for 15,000 rpm spindle (opt.).
High Rigidity Design
- FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
- Direct drive provides backlash free, best accuracy, reliability and stability.
- All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed
- The rigid body construction makes for uncompromising precision and rigidity.
High Stability Tool Magazine
- Absolute encoder ATC system provides high stability and speed.
- Inverter controlled, prevents tool change speed from changing under different power supply frequency.
- Tool change speed can be adjustable for heavy tools.
- Auto Tool Change (T-T): 1.8 sec.
- Tool Magazine Capacity: 24T
Automatic Tool Magazine Door Design
- Driven by pneumatic cylinder.
- Prevent coolant and chips from entering tool magazine.
Brand New Exterior Design
- Full enclosure exterior (including top cover).
- Convertible side window for convenient chip removal.
- Aesthetic rear cover design.
- Coolant shower for efficient chip removal <NXV Series std.>
- Travels 40″ x 23.6″ x 23.6″
- Table Size 40.09″ x 25.59″
- Max. Table Load 2,205 lbs
- Roller Guideways in all Axes
- (C10DM) Linear Scales on all axes
- 1G Acceleration in all Axes
- X/Y/Z Rapid Feedrate 1,890 ipm (C10DM) 945 ipm
- Max Cutting Feedrate 787 ipm
- Smart rigid tapping
- Fanuc MXP200FB+ Control
- AICC II+, high precision, and high accuracy AI contour control
- Smooth tolerance control+
- 400 blocks of look-ahead
- CTS Prep w/ Rotary Union
- 30 Tool ATC (Opt 48/60)
- Machine Weight 15,432 LBS
Error: Contact form not found.
*** Please note that not all brands are available in all North South territories.