M Shear

Safan Darley

SAFAN DARLEY HYBRID M-SHEAR

Description

Superior integration of hydraulics and electronics

  • Energy saving hybrid drive, low Co2 emissions
  • Only 22 litre oil tank
  • Low noise
  • User friendly touch screen control
  • Return-to-Sender sheet support
  • Torsion free cutting of small strips
  • Scrap separation
  • Fully automatic adjustment of cutting angle and clearance

With the M-Shear, the blade cuts four ways

The robust hydraulic systems in the SafanDarley M-Shear are controlled by modern electronics. This means that the regulatory mechanism has evolved from hydraulic to electronic technology. A successful E-volution that increases both your productivity and the quality of your products.

  • Touch Screen control, type TS200 with TFT colour monitor on a swivel arm
  • CNC controlled backgauge
  • Automatic clearance and cutting-angle adjustment
  • Automatic retraction of the backgauge for narrow strip widths
  • Adjustable starting and end stopping position for the entire length of the cutting beam
  • Backgauge supports equipped with ball screws and play free linear guides
  • Maintenance free cutting beam guides
  • Fine adjustment of backgauge parallelism
  • Adjustable hold down cylinders
  • Push-on adiprene covers for the hold down cylinders
  • Blades with 4 cutting edges, suitable for shearing stainless steel (max. tensile strength 54,4 US ton per square inch)
  • Cutting line lighting with cutting line indication
  • 2 support arms, adjustable over the entire width of the table (length is approx. 47,24 inches  from the cutting line)
  • 2 squaring guides on the right and left sides of the table (across the entire table width)
  • 2 rulers in the table
  • T slots and hand slots spread across the width of the table
  • 1 T slot on the front of the table
  • 2 spring-action stops
  • Key switch (3 positions)
  • Safety features complying with the European Machine Directive
  • Finger guard
  • Filled oil reservoir
  • Foundation plates
Model Cutting capacity Bending length in ft Main motor power in kW No. of strokes/min (stroke length max. cutting edge) No. of strokes/min (stroke length min. cutting edge) Cutting angle 0.5°-max (°) Backgauge reach in mm Backgauge speed in mm/sec No. of hold-down pads Weight in lb
205-4 0.517480315 81 11 44 110 2 39 472 14 9,259
255-4 0.517480315 100 11 39 100 2 39 472 17 11,464
310-4 0.517480315 122 11 34 90 2 39 472 20 13,669
430-4 0.517480315 169 11 22 60 1.5 39 472 26 18,078
510-4 0.517480315 240 11 14 48 1.5 39 472 36 41,447
205-6 0.236220472 81 11 32 90 2 39 472 14 9,259
255-6 0.236220472 100 11 28 85 2 39 472 17 11,464
310-6 0.236220472 122 11 24 80 2 39 472 20 13,669
430-6 0.236220472 169 15 15 34 1.5 39 472 26 27,558
510-6 0.236220472 240 15 12 30 1.5 39 472 36 41,447
255-8 0.31496063 100 15 19 40 2 39 472 17 19,621
310-8 0.31496063 122 15 16 35 2 39 472 20 21,605
430-8 0.31496063 169 15 13 30 1.5 39 472 26 31,967
205-10 0.393700787 81 15 15 35 2 39 472 14 18,078
255-10 0.393700787 100 15 14 32 2 39 472 17 19,621
310-10 0.393700787 122 15 12 30 2 39 472 20 21,605
430-10 0.393700787 169 15 10 24 2 39 472 26 36,376
510-10 0.393700787 240 18.5 5 16 2 39 472 36 61,729
255-13 0.511811024 100 30 20 50 3 49 295 17 23,149
310-13 0.511811024 122 30 18 46 3 49 295 20 27,558
430-13 0.511811024 169 30 14 38 3 49 295 26 40,786
255-16 0.62992126 100 30 14 38 3 49 295 17 23,149
310-16 0.62992126 122 30 12 34 3 49 295 20 27,558
430-16 0.62992126 169 30 8 26 3 49 295 26 47,399

Error: Contact form not found.

[/fusion_toggle][/fusion_accordion][/fusion_builder_column][/fusion_builder_row][/fusion_builder_container]