Mitsubishi EDM
MITSUBISHI MV2400-S WIRE EDM
Description
MV2400-S Advance Type M800 is a part of the most innovative and user-friendly wire EDM machine series on the market. The MV2400-S features our continued dedication to high precision and innovative technology with the highly reliable non-contact Cylindrical Drive System on the X & Y axis drives. The MV2400-S uses the new Mitsubishi M800 series control with a 19-inch cell phone like touchscreen—providing easier user interface than previous models. With advancements in machine construction and power supply technology, the MV2400-S is sure to revolutionize EDM machining and increase your shop’s productivity.
- V350-V AEII Power Supply with Digital Spark Control
- DMX-S (Digital Matrix Sensor) Shapes each spark reducing electrode wear
- Non-contact, Zero Back-Lash Linear Shaft Drive System XY (UV-Z use ball screws)
- All Fiber Optic servo control (4X faster internal communication speed)
- Submerged Machining to 12.2″ Deep
- Automatic Fluid Level Control
- Automatic Vertical Machine Tank Door
- Three Piece Hardened 3-Sided Stainless Work Table
- Fine Grain “Dianite” Casting Material
- Fixed Table Traveling Column Construction (Column Moves in X & Y)
- Windows 8 Embedded Operating System
- CFAST Compact Flash Card memory with 1GB user program storage
- Fully-Automatic Rough Machining Control covers PM, CM-R and EM functions
- Program Input Methods: Keyboard, USB Flash Memory, and Ethernet with FTP standard
- DC-Servo (Closed Loop) Torque Control Wire Tensioning System
- Linear Motion Guide Ways
- All-Axes Absolute Control System
- Linear Glass Scale Feedback (X-Y Axes)
- Optical Rotary Encoder Feedback (UV-Z-Axis)
- Scrap Wire Processor (Chopper) (Optional)
- New 17″ AT Annealing Length Improves Threading Reliability
- Inverter Controlled 16-Step Programmable Flushing
- Full Time AEII (Anti-Electrolysis) Power Supply Protection
- Dielectric Fluid Chiller Standard
- Full 2-yr. Warranty with Triple Diamond Partnership Program
- Special 10 Year Positioning Warranty (Covers the Cylindrical Drive System)
- Remote 360 (Remote user monitoring, diagnostics & service support)
- Preventative Maintenance (PM) Visit (to be used by end of 1st year)
- Auto-Oiler Lubrication System
| Machine Travels: X x Y x Z in (mm) | 23.6 x 15.7 x 12.2 (600 x 400 x 310) |
|---|---|
| Maximum Workpiece Dimensions: W x D x H in (mm) | 41.3 x 32.3 x 12.0 (1050 x 820 x 305) |
| Max. Submerged Workpiece Weight: lb (kg) | 3307 (1500) |
| Table Dimensions: in (mm) | 33.0 x 22.0 (840 x 560) |
| U/V Travels (from center): in (mm) | ±3.0 x ±3.0 (±75 x ±75) |
| Taper Angle @ Thickness: in (mm) | 15 deg.@ 10.2 (15 deg.@ 260) |
| Wide Angle Taper (Optional Guides Required) | 45 deg. @ 2.4″ 60mm (No AT Possible) |
| Table Rapid Feed Speed: in/min (mm/min) | 51.2 (1300) |
| Power Supply | V350-V |
| Minimum Drive Unit / Resolution | 0.000002 / 2 µin ( 0.00005 / 50nm) |
| User Program Storage [Hard Disk Size] | 1 GB [80 GB] |
| Wire Diameter Possible: in (mm) | 0.004~0.012 (0.1~0.3) |
| Minimum Start Hole Diameter: in (mm) | 0.02 (0.5) |
| Max. Wire Spool size STD [optional]: lb (kg) | 22 [44] (10 [20]) |
| Filters / Type | 2 / Paper |
| Filter Tank Capacity: gal (L) | 227 (860) |
| Machine System Dimensions: in (mm) | 105.8 x 119.3 (2687 x 3030) |
| Machine Installed Height: in (mm) | 84.6 (2150) |
| Machine System Weight: lb (kg) | 7716 (3500) |
| Fluid System Weight: lb (kg) | 711 (350) |
| Power Requirements [KVA] | 200-230V [13.5] Built in AVR |
| Compressed Air Requirements | 2.7 cu.ft./min. @ 71~100 psi |
Error: Contact form not found.
*** Please note that not all brands are available in all North South territories.