Mitsubishi EDM
MITSUBISHI MV1200-R WIRE EDM
Description
Introducing the MV1200-R Advance Plus M800. The new machine features the Mitsubishi M800 series control with a 19-inch cell phone like touchscreen for easier user interface. Mitsubishi is dedicated to constant innovation and strives to build only the highest quality machines. The MV-R series features new improvements in machine construction, auto-threading, internal machine communication, power supply technology and operating costs. The MV1200-R M800 also includes the highly reliable non-contact Cylindrical Drive System on the X, Y, U & V axis drives. The machine’s improved features are sure to advance your EDM machining.
- V350-V AEII Power Supply with Digital Spark Control
- DMX-S (Digital Matrix Sensor) Shapes each spark reducing electrode wear
- Non-contact, Zero Back-Lash Linear Shaft Drive System XYUV (no ball screws)
- All Fiber Optic servo control (4X faster internal communication speed)
- Submerged Machining to 8.7″ Deep
- Automatic Fluid Level Control
- Automatic Vertical Machine Tank Door
- One Piece Hardened 4-Sided Stainless Work Table
- Fine Grain “Dianite” Casting Material
- Split Axis Construction (Table Moves in X, Column Moves in Y)
- Windows 8 Embedded Operating System
- CFAST Compact Flash Card memory with 1GB user program storage
- Fully-Automatic Rough Machining Control covers PM, CM-R and EM functions
- Program Input Methods Keyboard, USB Flash Memory, and Ethernet with FTP standard
- DC-Servo (Closed Loop) Torque Control Wire Tensioning System
- Linear Motion Guide Ways
- All-Axes Absolute Control System
- Linear Glass Scale Feedback (X-Y-U-V Axes)
- Optical Rotary Encoder Feedback (Z-Axis)
- Auto-Threading with Scrap Wire Processor (Chopper)
- New 14″ AT Annealing Length Improves Threading Reliability
- Inverter Controlled 16-Step Programmable Flushing
- Full Time AEII (Anti-Electrolysis) Power Supply Protection
- Dielectric Fluid Chiller Standard
- Full 2-yr. Warranty with Triple Diamond Partnership Program
- Special 10 Year Positioning Warranty (Covers the Cylindrical Drive System)
- Remote 360 (Remote user monitoring, diagnostics & service support)
- Preventative Maintenance (PM) Visit (to be used by end of 1st year)
- Auto-Oiler Lubrication System
| Machine Travels: X x Y x Z in (mm) | 15.7 x 11.8 x 8.7 (400 x 300 x 220) |
|---|---|
| Maximum Workpiece Dimensions: W x D x H in (mm) | 31.9 x 27.6 x 8.5 (810 x 700 x 215) |
| Max. Submerged Workpiece Weight: lb (kg) | 1102 (500) |
| Table Dimensions: in (mm) | 25.2 x 21.3 (640 x 540) |
| U/V Travels (from center): in (mm) | ±2.4 x ±2.4 (±60 x ±60) |
| Taper Angle @ Thickness: in (mm) | 15 deg.@ 8.0 (15 deg.@ 200) |
| Wide Angle Taper (Optional Guides Required) | 45 deg. @ 1.8″ 45mm (No AT Possible) |
| Table Rapid Feed Speed: in/min (mm/min) | 51.2 (1300) |
| Power Supply | V350-V |
| Minimum Drive Unit / Resolution | 0.000002 / 2 µin ( 0.00005 / 50nm) |
| User Program Storage [Hard Disk Size] | 1 GB [80 GB] |
| Wire Diameter Possible: in (mm) | 0.004~0.012 (0.1~0.3) |
| Minimum Start Hole Diameter: in (mm) | 0.02 (0.5) |
| Max. Wire Spool size STD [optional]: lb (kg) | 22 [44] (10 [20]) |
| Filters / Type | 2 / Paper |
| Filter Tank Capacity: gal (L) | 145 (550) |
| Machine System Dimensions: in (mm) | 79.7 x 106.4 (2025 x 2702) |
| Machine Installed Height: in (mm) | 79.3 (2015) |
| Machine System Weight: lb (kg) | 5952 (2700) |
| Fluid System Weight: lb (kg) | Included with machine |
| Power Requirements [KVA] | 200-230V [13.5] Built in AVR |
| Compressed Air Requirements | 2.7 cu.ft./min. @ 71~100 psi |
Error: Contact form not found.
*** Please note that not all brands are available in all North South territories.