Description

This single cylinder model is a great entry level Ironworker for those who only require 40 to 55 tons of punching capacity and do not exceed 3” x 3” x 5/16” angle.  This Ironworker also shears plate, cuts round bar & square bar, mitre angle and has additional features.

Features

  • 40 Ton Punch
  • 3” x 3” x 5/16” Angle with Non-Deform Cut
  • 12” x 3/8” Plate Shear
  • Adjustable Swing-Away Stripper
  • Quick Change Punch Holder
  • Rapid Stroke Adjustment
  • Jog Switch for Spotting of Punch
  • Angle Mitering
  • Plate Support Table with Guide Arms
  • Sarter Set of 10 Round Punches & Dies
  • Easy Access Doors at Front and Rear

Specifications

90 Degree Check
45 Degree 1 Leg
Flat Bar Check
Punching Check
Notching Check
Folding Optional
Electric Length Gauge Check

 

    MICROCROP MINICROP BENDICROP
SHEARS FOR FLATBAR In      
Flatbar In 13 ¾” x ¼” 10” x 3/8” 14” x 3/8”
Length of Blade In 14” 12” 14”
Round Bar In 1-3/16”
Square Bar In 1”
Cut of an L at 45 Degree In 2 ½” 3” 2 ½”
Working Height In 38 ½” 40 ½” 31 7/8”
SHEARS FOR SECTION IRON        
L @ 90 Degree   3” x 3” x 5/16” 3” x 3” x 5/16” 3” x 3” x 5/16”
L @ 45 Degree   2” x 2” x ¼”    
Round Bar   1 3/8” (Optional) 1 ¼” 1 3/8”
Square Bar   1 ¼” (Optional) 1 ¼” 1 ¼”
NOTCHING   (Optional)    
Plate Thickness   5/16” ¼” 3/8”
Depth   2” 2” 3”
Width   1 3/8” 1 1/2’” 4”
PUNCHING        
Punching Power   40 50 55
Maximum Capacity   01 – 1/16” x 3/8” 01 – 1/16” x 1/2” 01 – 1/16” x 1/2”
Throat   6 5/8” 6 7/8” 7”
Stroke   28 21 50
Working Height   38 ½” 40” 38 3/8”
BENDING ATTACHMENT   Optional Optional Integrated
Bending Power   36 45 50
Max Width   3” 3” 4”
Max Capacity   3” x ½” 3” x 9/16” 4” x 3/8”