Geka
GEKA MINICROP IRONWORKER
Description
This single cylinder model is a great entry level Ironworker for those who only require 40 to 55 tons of punching capacity and do not exceed 3” x 3” x 5/16” angle. This Ironworker also shears plate, cuts round bar & square bar, mitre angle and has additional features.
- 40 Ton Punch
- 3” x 3” x 5/16” Angle with Non-Deform Cut
- 12” x 3/8” Plate Shear
- Adjustable Swing-Away Stripper
- Quick Change Punch Holder
- Rapid Stroke Adjustment
- Jog Switch for Spotting of Punch
- Angle Mitering
- Plate Support Table with Guide Arms
- Sarter Set of 10 Round Punches & Dies
- Easy Access Doors at Front and Rear
| 90 Degree | Check |
| 45 Degree | 1 Leg |
| Flat Bar | Check |
| Punching | Check |
| Notching | Check |
| Folding | Optional |
| Electric Length Gauge | Check |
| MICROCROP | MINICROP | BENDICROP | ||
| SHEARS FOR FLATBAR | In | |||
| Flatbar | In | 13 ¾” x ¼” | 10” x 3/8” | 14” x 3/8” |
| Length of Blade | In | 14” | 12” | 14” |
| Round Bar | In | 1-3/16” | – | – |
| Square Bar | In | 1” | – | – |
| Cut of an L at 45 Degree | In | 2 ½” | 3” | 2 ½” |
| Working Height | In | 38 ½” | 40 ½” | 31 7/8” |
| SHEARS FOR SECTION IRON | ||||
| L @ 90 Degree | 3” x 3” x 5/16” | 3” x 3” x 5/16” | 3” x 3” x 5/16” | |
| L @ 45 Degree | 2” x 2” x ¼” | |||
| Round Bar | 1 3/8” (Optional) | 1 ¼” | 1 3/8” | |
| Square Bar | 1 ¼” (Optional) | 1 ¼” | 1 ¼” | |
| NOTCHING | (Optional) | |||
| Plate Thickness | 5/16” | ¼” | 3/8” | |
| Depth | 2” | 2” | 3” | |
| Width | 1 3/8” | 1 1/2’” | 4” | |
| PUNCHING | ||||
| Punching Power | 40 | 50 | 55 | |
| Maximum Capacity | 01 – 1/16” x 3/8” | 01 – 1/16” x 1/2” | 01 – 1/16” x 1/2” | |
| Throat | 6 5/8” | 6 7/8” | 7” | |
| Stroke | 28 | 21 | 50 | |
| Working Height | 38 ½” | 40” | 38 3/8” | |
| BENDING ATTACHMENT | Optional | Optional | Integrated | |
| Bending Power | 36 | 45 | 50 | |
| Max Width | 3” | 3” | 4” | |
| Max Capacity | 3” x ½” | 3” x 9/16” | 4” x 3/8” |
- 40 Ton Punch
- 3” x 3” x 5/16” Angle with Non-Deform Cut
- 12” x 3/8” Plate Shear
- Adjustable Swing-Away Stripper
- Quick Change Punch Holder
- Rapid Stroke Adjustment
- Jog Switch for Spotting of Punch
- Angle Mitering
- Plate Support Table with Guide Arms
- Sarter Set of 10 Round Punches & Dies
- Easy Access Doors at Front and Rear
| 90 Degree | Check |
| 45 Degree | 1 Leg |
| Flat Bar | Check |
| Punching | Check |
| Notching | Check |
| Folding | Optional |
| Electric Length Gauge | Check |
| MICROCROP | MINICROP | BENDICROP | ||
| SHEARS FOR FLATBAR | In | |||
| Flatbar | In | 13 ¾” x ¼” | 10” x 3/8” | 14” x 3/8” |
| Length of Blade | In | 14” | 12” | 14” |
| Round Bar | In | 1-3/16” | – | – |
| Square Bar | In | 1” | – | – |
| Cut of an L at 45 Degree | In | 2 ½” | 3” | 2 ½” |
| Working Height | In | 38 ½” | 40 ½” | 31 7/8” |
| SHEARS FOR SECTION IRON | ||||
| L @ 90 Degree | 3” x 3” x 5/16” | 3” x 3” x 5/16” | 3” x 3” x 5/16” | |
| L @ 45 Degree | 2” x 2” x ¼” | |||
| Round Bar | 1 3/8” (Optional) | 1 ¼” | 1 3/8” | |
| Square Bar | 1 ¼” (Optional) | 1 ¼” | 1 ¼” | |
| NOTCHING | (Optional) | |||
| Plate Thickness | 5/16” | ¼” | 3/8” | |
| Depth | 2” | 2” | 3” | |
| Width | 1 3/8” | 1 1/2’” | 4” | |
| PUNCHING | ||||
| Punching Power | 40 | 50 | 55 | |
| Maximum Capacity | 01 – 1/16” x 3/8” | 01 – 1/16” x 1/2” | 01 – 1/16” x 1/2” | |
| Throat | 6 5/8” | 6 7/8” | 7” | |
| Stroke | 28 | 21 | 50 | |
| Working Height | 38 ½” | 40” | 38 3/8” | |
| BENDING ATTACHMENT | Optional | Optional | Integrated | |
| Bending Power | 36 | 45 | 50 | |
| Max Width | 3” | 3” | 4” | |
| Max Capacity | 3” x ½” | 3” x 9/16” | 4” x 3/8” |