Description

This single cylinder model is a great entry level Ironworker for those who only require 40 to 55 tons of punching capacity and do not exceed 3” x 3” x 5/16” angle.  This Ironworker also shears plate, cuts round bar & square bar, mitre angle and has additional features.

Features

  • 40 Ton Punch
  • 3” x 3” x 5/16” Angel with No-Slug-Loss Cut
  • 14” x 1/4” or 7” x ½” Plate Shear
  • 4” x 3/8” Built in Press Brake
  • Easy Stroke Adjustment
  • Jog Switch
  • Swing-Away Stripper
  • Quick Change Punch Holder
  • Capability to Cut Angle on Mitre
  • Remote Foot Pedal
  • Available in Single Phase
  • Wide Range of Accessories
  • Pre-Wired for Electric Length Gauge

Specifications

90 Degree Check
45 Degree 1 Leg
Flat Bar Check
Punching Check
Notching Check
Folding Check
Electric Length Gauge Check

 

MICROCROP MINICROP BENDICROP
SHEARS FOR FLATBAR In
Flatbar In 13 ¾” x ¼” 10” x 3/8” 14” x 3/8”
Length of Blade In 14” 12” 14”
Round Bar In 1-3/16”
Square Bar In 1”
Cut of an L at 45 Degree In 2 ½” 3” 2 ½”
Working Height In 38 ½” 40 ½” 31 7/8”
SHEARS FOR SECTION IRON
L @ 90 Degree 3” x 3” x 5/16” 3” x 3” x 5/16” 3” x 3” x 5/16”
L @ 45 Degree 2” x 2” x ¼”
Round Bar 1 3/8” (Optional) 1 ¼” 1 3/8”
Square Bar 1 ¼” (Optional) 1 ¼” 1 ¼”
NOTCHING (Optional)
Plate Thickness 5/16” ¼” 3/8”
Depth 2” 2” 3”
Width 1 3/8” 1 1/2’” 4”
PUNCHING
Punching Power 40 50 55
Maximum Capacity 01 – 1/16” x 3/8” 01 – 1/16” x 1/2” 01 – 1/16” x 1/2”
Throat 6 5/8” 6 7/8” 7”
Stroke 28 21 50
Working Height 38 ½” 40” 38 3/8”
BENDING ATTACHMENT Optional Optional Integrated
Bending Power 36 45 50
Max Width 3” 3” 4”
Max Capacity 3” x ½” 3” x 9/16” 4” x 3/8”