CMS Jetpower Evo

CMS

CMS JETPOWER EVOPUMP

Description

A new concept of technologically rich, high precision pressure intensifiers able to meet the most demanding user requirements. By adopting multiple, independent, parallel and electronically synchronised pressure multipliers in each pressure intensifier we can maintain a constant pressure, eliminating the significant pressure troughs typical of traditional opposite cylinders intensifiers.

  • Absolutely Constant Pressure and No Accumulator
  • Higher stability of the dynamic signal as a guarantee of a superior quality cut
  • Lower wear of all machining center high pressure circuit components, long life of materials, and reduction in maintenance cycles
  • Technology of independent cylinders makes it possible to exclude any cylinder that requires servicing, without need to stop machine.
  • Software-Based electronic control of cutting pressure
  • Electronic monitoring of temperature, pressure, and filter clogging
  • Hydraulic pump with variable flow rate
  • Hydraulic cylinders return circuit with independent pump
  • Air/Oil exchanger for hydraulic circuit cooling (water/oil option)
  • Connectable to any cutting system
TECNICAL DATA
  Jetpower Evo 30 Hp Jetpower Evo 60 Hp Jetpower Evo 120 Hp
POWER 22,5 kW / 30 Hp 45 kW / 60 Hp 90 kW / 120 Hp
MULTIPLIER 2 3 6
MAX WATER PRESSURE 4150 bar / 60.000 psi 4150 bar / 60.000 psi  4150 bar / 60.000 psi
MAX WATER PRESSURE 2,5 lpm / 0,66 gpm 5 lpm / 1,32 gpm 9 lpm / 2,38 gpm
MAX DIAMETER ORIFICES 0,28 mm / 0,011 in 0,40 mm / 0,016 in 0,50 mm / 0,019 in
VOLTAGE 400V +/- 5% 50-60 Hz (Different voltages and frequencies on request)

Error: Contact form not found.

  • Absolutely Constant Pressure and No Accumulator
  • Higher stability of the dynamic signal as a guarantee of a superior quality cut
  • Lower wear of all machining center high pressure circuit components, long life of materials, and reduction in maintenance cycles
  • Technology of independent cylinders makes it possible to exclude any cylinder that requires servicing, without need to stop machine.
  • Software-Based electronic control of cutting pressure
  • Electronic monitoring of temperature, pressure, and filter clogging
  • Hydraulic pump with variable flow rate
  • Hydraulic cylinders return circuit with independent pump
  • Air/Oil exchanger for hydraulic circuit cooling (water/oil option)
  • Connectable to any cutting system

TECNICAL DATA
  Jetpower Evo 30 Hp Jetpower Evo 60 Hp Jetpower Evo 120 Hp
POWER 22,5 kW / 30 Hp 45 kW / 60 Hp 90 kW / 120 Hp
MULTIPLIER 2 3 6
MAX WATER PRESSURE 4150 bar / 60.000 psi 4150 bar / 60.000 psi  4150 bar / 60.000 psi
MAX WATER PRESSURE 2,5 lpm / 0,66 gpm 5 lpm / 1,32 gpm 9 lpm / 2,38 gpm
MAX DIAMETER ORIFICES 0,28 mm / 0,011 in 0,40 mm / 0,016 in 0,50 mm / 0,019 in
VOLTAGE 400V +/- 5% 50-60 Hz (Different voltages and frequencies on request)

Error: Contact form not found.

*** Please note that not all brands are available in all North South territories.